Copyright 2020 Iron Bow Technologies
15
Control Panel Functions
The CLINiC control panel buttons and associated functions are described below:
Description:
1.
Answer incoming call/place call to defined contact. (See CLINiC Administration)
2.
End or reject call
Secondary function; press and hold for 5 seconds then release to temporarily
display codec information on screen
3.
Enable video privacy from the CLINiC camera during a call, or revert to normal
video transmission. Video from a connected PC, medical video device, or other
video peripheral will still be shown to local and remote participants.
4.
Display and transmit images and data from connected peripheral device connected
to side HDMI port designated with Horus Scope symbol. By default, pressing this
button displays the images and data of peripheral device connected.
5.
Display and transmit images and data from connected peripheral device connected
to side HDMI port designated with PC symbol. By default, pressing this button
displays the images and data of peripheral device connected.
6.
Zoom camera out.
7.
Zoom camera in.
8.
Pan and tilt the camera
Secondary function: moves self-view PIP around the screen when PIP
mode is activated.
9.
Enable or disable self-view mode
Secondary function: press and hold for 5 seconds then release to enter
PIP location mode – press second time to clear PIP location function
10.
Decrease speaker volume.
11.
Increase speaker volume
12.
Mute or unmute microphone.
13.
Enable or disable headphone mode for private listening.
14.
Enable or disable stethoscope mode.
15.
“On Air” Indicator – Illuminates when system is in an active call
Figure 15 – Control Panel Functions
