www.irobot.com
Cautions
Please read this manual completely before operating your pool cleaner.
Retain the safety and operating instructions for future reference.
Do not switch the pool cleaner ON if it is not fully immersed in
water. Operating the cleaner out of water will cause severe damage
immediately and will result in loss of warranty.
Allow the cleaner to remain in the pool for 15 to 20 minutes following
the end of its cleaning cycle. This will allow the motors to cool
adequately.
Do not use Verro in a pool warmer than 100 degrees Fahrenheit.
Do not use the floating power cord to lift Verro from the pool. Use the
handle.
Do not force the floating power cord plug. It will fit into the socket only
one way.
The floating power cord must be locked in the socket on the Power
Supply.
Do not leave your cleaner in direct sunlight when not in use.
Never leave the Power Supply in direct sunlight and avoid leaving it in
the rain.
