H
ardware Developer’s Manual
3
© 2021 Iritech, Inc. All rights reserved.
4.
Warnings and Precautions
IriShield
TM
-UART includes sensitive electronics and optics. It is possible for IriShield
TM
-UART
device to get these electronics damaged if you do not follow proper precautions:
•
Clean regularly to remove dust, but do not use any cleaning solutions. Only wipe the
device with a smooth cloth or towel. Keep the lens free of dust and dirt, and use a
special cloth for optics in order to avoid scratching the optics.
•
Do not allow water to leak into the device or operate the device in humid conditions
where water might condense upon the electronics.
•
Do not operate device in places where temperate reach extremes beyond the stated
range.
•
Do not place the device next to heating equipment.
•
Do not place magnets near the device.
•
Do not apply voltage or current beyond the stated range.
•
Do not use the device for any purposes beyond those specified.
•
Do not disassemble components from the boards or alter wiring or board design.
•
Do not drop the device or submit to sudden impact or mechanical stresses.
•
Handle the electronics with proper anti-static protection and techniques to prevent
shorting any microchips.
Any damage to the device caused by these activities will void the warranty.