English English
6. Configuration
To access the configuration settings, click the settings icon in the bottom left corner.
Contact
On this tab you can enter your Name, Email and Phone number. If you fill in these fields,
their data is filled in automatically in the contact form when you contact Technical
Support. You can contact Technical Support by clicking and then Call support.
Personalizing
On this tab you can personalize your IRISPen
TM
application.
•
To start IRISPen
TM
automatically when you start your computer, select Run this
software on startup.
•
IRISPen
TM
updates automatically when new updates are available. In case you
want to avoid automatic updates, clear the option Auto Update.
•
IRISPen
TM
is available in 20 interface languages. Select the required language from
the list.
•
Select the Scanning hand:
•
Select Right hand to scan lines from left to right.
•
Select Left hand to scan lines from right to left.
Image Scan
On this tab you can define the minimal image width. In general the default width is
recommended (3000). To scan extremely small text you can increase the minimal image
width. The higher this value, the smaller the text you can scan.
Separators
The separators determine how the lines you scan will be separated.
Scan separator: select what IRISPen
TM
must do after you have scanned a line.
11
