Iridium GO! Vehicular Kit
13
3.2
Mounting Option 1:
Wall Bracket Kit (G), RAM Round Plate with Ball (F) with the Twist Lock Mounting
kit (from 4.1)
Step 1)
Screw the Mounting Plate to the back of the
Iridium GO!
Step 2)
Note: To route cables on the mounting bracket, refer
to the Wall Mounting Instruction Guide included in the
kit.
Screw together the RAM Round Plate with Ball to the
Wall Bracket using the two M4 x 16 screws and M4
nylon hex nut. Make
sure the two holes of
the mount align with
the bracket as shown
in the drawing.
Step 3)
The RAM plate and the wall bracket screwed
together is shown below.
Step 4)
Slide the Iridium GO! into the wall bracket as shown.
Make sure it sits secure and locks in place.
Step 5)
Assemble the Iridium GO! In the bracket with the RAM mount as shown in the drawing below. This is now ready to install on a
windscreen or a glass window.
