ircon Modline 4, Инструкция по установке и эксплуатации

Страница: 13 / 88

1–7
Section 1 — INTRODUCTION
1.6 SPECIFICATIONS
The following specifications are common to all Series of MODLINE 4:
Operating Wavelength Region: Varies by Series (see Table 1.1)
Emissivity Range: Adjustable from 0.10 to 0.99 in 0.01 increments
Power Supply and Load Requirements: Input voltage: 24V direct current (dc) nominal16V direct
current (dc) minimum to 40V direct current (dc) 20mA
maximum. In order for the MODLINE 4 to meet
European Electromagnetic Compatibility Directive
,
a CE version power supply is required.
Load resistance:
≤
1 ohm at 16 to 24V direct current;
1200 ohms at 40 V direct current (see Section 2.4 for
additional information)
Fuse Rating: For customer supplied power supplies, the power supply
must be fused such that at 40V direct current the current
(I) level must be less than 4 amps. At 16V direct current
the current (I) cannot exceed 8 amps and the power
supply total output must not exceed 150 VA.
Output Current: 4 to 20 mA direct current
Response Time: Continuously adjustable from approximately
(to 95% of any change in input) 0.15 sec to 10 sec
Peak Picker Decay Range: Continuously adjustable from approximately
(for models with Peak Picker) 15 sec to 30 min for full-scale decay
Humidity Limits: 0 to 90% non-condensing
Enclosure Material: Aluminum
Weight: Standard Enclosure: 2.6 lbs (1.2 kg)
Water-cooled Enclosure: 20 lbs (9.25 kg)