AT20 Online Dual-spectrum Thermal Camera User Manual
4
2.
Safety Information
WARNING
Before using the cleanser, make sure you read all applicable material safety
data sheets (SDS) and warning labels on cleanser containers.
WARNING
Do not use too long screws when installing the front/rear mounting bracket,
which may damage the thermal camera.
WARNING
It is prohibited to place the product in a high temperature above 70°C or in a low
temperature below-45 °C.
WARNING
It is forbidden to disassemble or refit the infrared thermal camera at will.
CAUTION
No matter if there is a lens cover, do not point the thermal camera towards strong
light or equipment with laser radiation. This will affect the accuracy of the
thermal camera and even damage the detector in the thermal camera.
CAUTION
Do not use the product under conditions that doesn’t match the environmental
requirements. For specific use environment requirements, see the product
parameter table.
