Iradion Infinity 1625, Руководство оператора

Страница: 5 / 34

2
General Hazards
Danger - Serious Personal Injury
This Class 4 laser product emits invisible infrared laser radiation at 10.6µm.
Do not allow laser radiation to enter the eye by viewing direct or reflected laser
energy. CO2 laser radiation can be reflected from metallic objects even though
the surface is darkened. Direct or diffuse laser radiation can inflict severe corneal
injuries leading to permanent eye damage or blindness. All personnel must wear
eye protection suitable for 10.6µm CO2 radiation when in the same area as an
exposed laser beam. Eyewear protects against scattered energy but is not
intended to protect against direct viewing of the beam.
Never look directly into the laser output aperture or view scattered laser
reflections from metallic surfaces even when wearing goggles. Instant blindness
can occur.
This laser presents a particular danger due to its very high power density. The
optical intensity at the output window is VERY high (>8500W/cm
2
).
Enclose the beam path whenever possible. Exposure to direct or diffuse CO2
laser radiation can seriously burn human or animal tissue, which may cause
permanent damage
This product is not intended for use in explosive, or potentially explosive,
atmospheres.
Warning – Serious Personal Injury
U.S. customers should refer to and follow the laser safety precaution described
in the American Nation Standards Institute (ANSI) Z136.1-2014 document, Safe
Use of Lasers. Procedures listed in this Standard include the appointment of a
Laser Safety Officer (LSO), Operation of the product in an area of limited access
by trained personnel, servicing of equipment only by trained and authorized
personnel, and posting of signs warning of the potential hazards.
European customers should appoint a Laser Safety Officer (LSO) who should
refer to and follow the laser safety precautions described in EN60825.1-2014
Safety of Laser Products.