WWW.IQUATICS.CO.UK
THANK YOU FOR PURCHASING THE IQUATICS AQUALUMI UNIVERSAL
THE FUTURE OF AQUARIUM LIGHTING
FITTING FLAPS
The AquaLumi Universal has been
designed to incorporate your existing
aquarium covering flap set. The lighting
system should be positioned so that the flap
set fully covers the aquarium. Your existing
flap set will determine where the installation
point should be.
For aquariums without a flap set the unit
can be positioned wherever required.
If required the AquaLumi Universal can be
extended to fit your aquarium. Simply
unscrew the plastic screw located on the
top of each of the end caps, slide out the
extension brackets to the required length
and tighten the screw back up.
Be sure not to over-tighten the screw.
Each side will extend upto 50mm.
Maximum extension - 100mm
Please see table below for product
specification.
TIGHTENING SCREW
MAX 50MM
REPLACEMENT
TUBE
MODEL
SPECIFICATION
MIN
LENGTH
MAX
LENGTH
DIMENSIONS
W X H (MM)
Aqualumi Universal 550mm
24w (435mm)
533mm
633mm
83 x 52
Aqualumi Universal 600mm
24w (435mm)
593mm
693mm
83 x 52
Aqualumi Universal 700mm
28w (590mm)
693mm
793mm
83 x 52
Aqualumi Universal 800mm
28w (590mm)
793mm
893mm
83 x 52
Aqualumi Universal 920mm
35w (742mm)
903mm
1003mm
83 x 52
Aqualumi Universal 1000mm
45w (895mm)
993mm
1093mm
83 x 52
Aqualumi Universal 1200mm
54w (1047mm)
1180mm
1280mm
83 x 52
Aqualumi Universal 1500mm
54w (1200mm)
1480mm
1580mm
83 x 52
Aqualumi Universal 1800mm
80w (1450mm)
1780mm
1880mm
83 x 52