Installation and Connection
27
9
Installation and Connection
All environmental and operating requirements specified in the technical
data must be met to ensure proper functioning of the CAR-A-WAN.112 to
be guaranteed.
When installing the CAR-A-WAN.112 the following must be observed:
Only make modifications to the on-board electrical system of your vehicle
yourself if you have the necessary specialist knowledge.
Make sure that the ventilation of the CAR-A-WAN.112 is guaranteed.
Pay attention to the bend radii of antenna cables. Knots and too narrow
bending radii can lead to breaks in the antenna cable and conductors.
Bring cables to room temperature before laying them.
The device is equipped with colour-coded system screw connections which
correspond to the drawing on the device cover. This makes it more difficult
to reverse the polarity on the device.