Device description CAR-A-WAN.112
20
The power supply connection contacts permanent plus 12-
24V DC (clamp 30), as well as switching plus (clamp 15) and
ground (clamp 31).
LAN connections (RJ45, Ethernet 1-2):
The Ethernet1 and WLAN interfaces are mutually bridged,
i.e. you can also connect your devices to LAN instead of
WLAN. Devices connected to the LAN can communicate
with devices connected to the WLAN. The clients are not
isolated from each other. The Ethernet2 interface is not yet
configured on delivery.
7.2
Elements on the back
On the back of the device, in the upper row, you will find the connections
for the mobile radio modems (WWAN 1-3) and their MIMO connections
WWAN 1M-3M and GPS. The lower row contains the connectors for the
WLAN antennas W1/W1M and the CAN connector.
