IPG Interpack USC 2024-BB 3, Руководство по эксплуатации и список запасных частей

Страница: 32 / 56

USC 2024-
BB 3” UNIFORM SEMI-AUTOMATIC CASE SEALER
Set-Up Procedures
4-7
4.7 C
ONNECTING
U
TILITIES
4.7.1 Electrical Utilities
An 11 foot (3.4m) standard three conductor power cord with plug is provided for 115V, 60Hz, 15A electrical
service. The receptacle must be properly grounded. Before the machine is plugged into the receptacle, ensure
that all materials are removed from the machine. The electrical control is protected with an automatic circuit
breaker with resettable overload (refer to Figure 4-7).
The electrical control box can be located on either side of the Case Sealer for customer convenience. It contains
the green
ON push button and the red E-Stop re-settable push button, which is to be used both for emergency
stops as well as a stop button, The E-Stop button requires a ¼ turn to release.
Note: Moving the control box to the opposite side of the machine requires disconnecting and
reconnecting electrical wires and components. Only trained and qualified service technicians
should access an open control box. Follow all possible safety procedures prior to and during this
process.
Figure 4-7 Electrical Utilities