IPG BETTER PACKAGES RSA 2024-WAT-EU, Руководство пользователя

Страница: 40 / 220

RSA2024-WAT-EU Set-Up Procedures
4-15
4.10.3 Bottom Tape Threading/Loading Instructions
The instructions below will assist in threading of tape on the bottom
tape head. Bottom Threading diagram is located on page 4-14.
1. Put machine in Manual Mode using
Manual/Auto
selector
switch (Figure 4-18, Item 1).
2. Install tape roll onto mandrel making sure the unwind
direction is clockwise (refer to Figure 4-17). To move
mandrel to tape roll installation position, pull locking lever to
unlock mandrel slide handle (Figure 4-19, Item 5) then pull
handle outward. After tape roll has been installed, move
mandrel to running position by pushing mandrel slide handle
inward and securing with locking lever.
3. Pull tape around peel-off roller and towards the
front of the machine with adhesive side facing down
(Figure 4-20, Item 6).
4. Thread tape over the first guide roller (Figure 4-20, Item 7),
bring tape around and under the second guide roller
(Figure 4-20, Item 8), and pull towards the front of the tape
head.
5. After threading through the second guide roller, pass
tape over powered roller (Figure 4-20, Item 10), pull under
third guide roller (Figure 4-20, Item 9), and bring tape up to
the pinch roller (Figure 4-20, Item 11). Ensure pinch roller is
not engaged, using the Tape Threading/Stop button
(Figure 4-18, Item 2) to engage/disengage the pinch roller.
6. Once tape has been passed under the pinch roller, engage
pinch roller using Tape Threading/Stop button (Figure 4-18,
Item 2).
7. Press down the Tape Feed button (Figure 4-18, Item 3)
to allow machine to pass tape through tape shoe and feed
out of the tape head.
8. If tape passes with no jams, remove tape from tape shoe guide,
switch machine to Auto (Figure 4-18, Item 1), press Start
button (Figure 4-18, Item 4), and hold for one second to begin
machine operation. If you encounter a jam, see
Clear Mode
(Clear Jam) on page 5-7.
Figure 4-18 Control Box - Bottom Threading
3
2
1
4
Figure 4-19 Mandrel Slide Handle
5