ipf electronic PY740025, Руководство пользователя

Страница: 12 / 67

MANUAL [ PY740025/26 ]
•
Subject to alteration! Version: 22.10.2018
ipf electronic gmbh • Kalver Straße 25 - 27 • 58515 Lüdenscheid │ Tel +49 2351 9365-0 • Fax +49 2351 9365-19 │ info@ipf.de •
www.ipf.de
12
4.4 Measuring field defintion
The maximum measuring field and additional important measuring field definitions are described in the
following diagram. The important terms "left" and "right" are to be regarded respectively from the viewpoint of
the connector side of the sensor.
The sensor measures the height of objects within the measuring field. With the HEIGHT
function, it is the end of measuring range Sde or optionally the teach-in reference surface
(If FLEX MOUNT is active).
NOTE
For further explanations, see section "Function and definition“ -> "Interfaces and
output" -> "Interfaces and output-> "Analog signal output".
X
Z
Reference point
HEIGHT function
0 mm
Meas
ur
ing
range
R2
Measuring
field width
right
Measuring
field width
left
O
ut
si
de
meas
ur
ing
rang
e
Measuring
field
Meas
ur
ing
ax
is
Blind range
Right Left
Measuring field
width
Start of measuring range Sdc
10V / 20 mA
End of measuring range
Sde 0V / 4 mA