IPETRONIK M-THERMO 96, Руководство по оборудованию, Страница: 8 / 30

2.1 Hardware setup
2.1.2 CAN interface
The M-THERMO 96 can also operate with an CAN interface. In this setup it is recommended to uses a 2
channel CAN card like IPEcan FD Pro. With a CAN interface, you have the ability to use it in many
combinations with other CAN based measurement modules. The configuration of the device is supported in
the IPEmotion data acquisition software together with the IPETRON-X PlugIn from release V10.00.00. The
following diagram visualizes the cabling setup with a direct connection to a CAN card.
To use the M-THERMP 96 with an CAN card interface the following hardware is required.
I Cable 620-233.xxx
I Cable 620-502.xxx
I M-CAN T-Junction
I IPEcan FD Pro CAN card
Hardware_Manual_M-THERMO_96 IPETRONIK GmbH & Co. KG ipetronik.com 8/30