IPcorder KNR-412, Руководство по установке

Страница: 9 / 19

Chapter 2
LED indicators and buttons of the
device
2.1 Device states and their indication
The Power LED always lights up in blue, which indicates the device is on.
The device may further indicate one of the following statuses:
ˆ Normal mode the System LED lights orange
ˆ Start the System LED ashes green
ˆ Shut down the System LED is simultaneously lit in orange and ashes green
ˆ Rescue Mode the System LED is lit in orange, and the individual disk LEDs ash red in sequence
from top to bottom
2.2 Controlling the device using the buttons
The device has two control buttons; the Power button is located on the front panel, and the Reset button
is in a small hole on the rear panel.
ˆ When the Power button is pressed and released, the device goes to Shut Down, after which it
restarts.
ˆ When the Power button is pressed and held for 2 seconds, the device shuts down. When this is
complete, the device may be safely disconnected from the mains supply.
ˆ When the Reset button is pressed in Normal Mode, the device goes to Shut Down, and subsequently
restarts in Rescue Mode.
ˆ Similarly, by pressing the Reset button in Rescue Mode, the device reverts back to Normal Mode.
9