IMPORTANT INFORMATIONS ABOUT OPTIONAL VERSIONS:
Appliance with full filter warning light (optional)
When the warning light activates means that the filtering bag -L- is full.
When the light is on, change the filter bag as soon as possible and clean the main
filter -K-.
Stop using your vacuum cleaner if the warning light is on.
Overheating can take place, causing permanent damages to the en-
gine.
While vacuuming soft surfaces like carpets, couches etc. the warning led can light
even if the filter bag is not full. If you move the tool away from the surface and the light
turns off, you can keep working.
Appliance with floor head additional socket (optional)
The socket -U- it is designed to connect a floor head.
WARNING: Maximum power allowed is 250W.
Don’t connect electrical floor brushes with a bigger load. This may re
-
sult in a fire hazard or electric shock.
Appliance with speed regulator (optional)
With speed regulator -T- you can increase or lower vacuum suction power (fig. 13)
Appliance with detachable cable (optional)
With this version you can detach power cord.
Motor with thermal protection (optional)
The motor has a thermal device that prevent dangerous overheating that can cause
motor failure. It turns the motor off when excessive heat is generated to prevent
burnings and damages.
WARNING:
Thermal protection intervene when one of these parts are clogged:
- filter bag -L-
- main filter -K-
- flexible hose -N-
- tool
Disconnect the appliance from the main, unclog the obstructed part and wait 20/30
minutes, once the motor cools down thermal protector reset itself.
ENGLISH
14
