Features
Δ Weatherproof IR Camera IP66
Δ Advanced H.264 High profile compression
Δ Support browsers: IE
Δ Support several servers, IP address, DDNS, FTP,SMTP
Δ Support single, dual, three streams
Δ Support iPhone, iPad, Android remote monitor
Δ Support connect to NVR
Δ Support ONVIF2.0
Δ Reliability and compatibility
Δ Low streams and high resolution image
Connection
RJ45
DC12V
IPC-BN25W3200T
IPC Fast Operation
User Manual
Please refer to the complete User manual
for more information from the CD.
HD-IP CAMERA
Specifications
Model
IPC-BN25W3200T
Image Sensor
1/3" 2.4 Megapixel CMOS Image sensor
Resolution
1920
×
1080
Minimum Illumi-
nation
>1Lux
S/N Ratio
>50db
Focus Mode
Manual Focus
Day/Night
IR cut filter with auto switch, IR sensor.
Network
1 RJ45 Ethernet interface, 10/100M adapta-
tion
Delay
Within The LAN 0.3S
Frame Rate
25/30 FPS (adjustable)
Video Compres-
sion
H.264 /JPEG
Protocol
RTSP/FTP/DDNS/NTP/SMTP
Onvif
Support Onvif 2.0
（
port:8999
）
User Permission
Multi-user Classification Management
Consumption
3.0W
Power
/
Current
DC 12V/1A or POE
Lens
3 Megapixel HD
Board Lens 3.6mm/F2.0
IR Status
IR LED:
￠
5X30PCS IR range: 25M
Dimension (mm)
142(W) x 68(H) x 66(D)mm
Weight (g)
500g
Temperature
-20
～
55
℃
Humidity
0%-90%RH,Without Condensation
POE
Yes(optional)
NO.
Name
Number (pcs)
1.
HD-IP Camera
1
2.
CD
1
3.
IPC Fast Op-
eration User
Manual
1
Model
IPC-BN25W3200T
IPC-BN25W3200T
IPC-BN25W3200T
Access to the IP Cam-
era via IE
1. Use correct power supply.
2. Make sure the device IP address
is in the same LAN with the
router, the default IP address of
the IPC is 192.168.1.168.
3. Go to CD->IPCSearch.exe and
copy it to your computer.
4. Open IPC Search, click “Search”,
you will find the device IP, and
you also can modify the IP infor-
mation, see the picture (1)
5. Factory default IP setting:
IP Address : 192.168.1.168
Subnet Mask: 255.255.255.0
Gateway: 192.168.1.1
User name: admin
Password: admin
6. After modifying IP, click “Search”
again, you will find the new IP of
the your device. Double-click the
new IP, you can access to the IPC
via IE, or enter the IP Address in
the address bar of IE, then click
“Enter”, the download_OCX
controls interface please see the
picture (2), Please click here
to download the OCX
controls.
7. as is shown in picture (3), Click
run, the system will automatically
download the OCX.
8. Click “yes” as the picture (4),Then
it will install the OCX
，
when
complete ,Click ”OK” and refresh
the page. You will enter the login
interface, as is shown in picture
(5)
9. Enter your username and pass-
word, you can start to access and
control your IP Camera.
Access to the IP Cam-
era via HSCMS
Go to CD, find “HerospeedCMS.exe.
“ Copy “HerospeedCMS.exe “ to
your computer and install it, then
run it. See the picture (6):
1
. Device list:
See the picture (7):
Here you can manually add your
IP Cameras. Also can click
“Search device” to search your IP
Cameras in local area network.
（
1
）
（
2
）
（
3
）
（
4
）
（
5
）
（
6
）
（
7
）
You can add different areas to
manage your device. Below the
area you can search all the
devices in LAN, then check the
IP info to add the camera.
See the picture (8):
You also can click “Manually
add” to enter the IP Info manu-
ally. See the picture (9):
Then you can view the images
and remote config the IP Cam-
era, such as Alarm, Video, Net,
Camuser, Date, etc. Please refer
to Herospeed CMS Customer
Manual for detail.
2. View the images
After adding the devices, you
can see the devices in “Device
List” of the main interface, you
can double _click the device to
control it to play or stop.
Access to the IP Camera
via Android mobile
Search and download the
surveillance software “Danale” to
your mobile from electronic mar-
kets or the Mobile Assistant, then
install it. Then you can see the icon
of the software
,click it to
run.
1. Login
The picture (10) shows the login
interface:
2. List
As is shown in picture (11)
2.1 Add Camera
Click “add camera”, as is shown
in picture (12):
Edit the camera name, input the
username, password, you can
input the camera ID manually or
scan the QR code directly. Click
“finish” to finish and save it.
3. Video Mode
Click
to set the Video
Mode.
4.Settings
Click
to set the IPC.As is
shown in picture (13):
4.1 User name password manage-
ment
Here you can edit the device
name, username and password.
4.2 NetWork Settings
Here you can set the local
network and WIFI according to
your need.
4.3 Basic information
Here you can view the basic
information of the IPC, including
device information, storage
information, etc.
(
8
)
(
9
)
(10)
(
11
)
(
12
)
(
13
)
Network Structure
switch/router/FOT
IPC
PC
NVR
