IPC CT15R, Руководство оператора

Страница: 40 / 41

GB
The electrolyte in the battery is tur-
bid (battery models only)
the battery has reached the end of the charging/
discharging cycles declared by the manufactu-
rer
replace the battery
the battery has been charged with too high a
current
replace the battery
the battery has been charged beyond the limit
suggested by the Manufacturer
replace the battery
Error codes displayed, battery version
Brush button LED (Fig. C, ref. 4), 2 fast flashes / pause / 2 fast flashes. Brush short circuit error.
Brush button LED (Fig. C, ref. 4),1 flash / pause / 1 flash. Overcurrent error
Suction button LED (Fig. C, ref. 5), 2 fast flashes / pause / 2 fast flashes. Suction motor short circuit error
Suction button LED (Fig. C, ref. 5), 1 flash / pause / 1 flash. Overcurrent error
Brush button LED (Fig. C, ref. 4) + suction button LED (Fig. C, ref. 5), flash in sync /
pause / flash in sync.
Electronic board temperature error
Brush button LED (Fig. C, ref. 4), 4 fast flashes / pause / 4 fast flashes. Brush cut-out error
Yellow battery charger control LED (Fig. C, ref. 2), 7 fast flashes / pause / 7 fast flashes. Machine on with battery charger po -
wered error, not featured on CT45
BT
Yellow battery charger control LED (Fig. C, ref. 2), 5 fast flashes / pause / 5 fast flashes. Excessive battery voltage error
Red, yellow, green battery charger control LEDs flashing, (Fig. C, ref. 2) ECS model and Roller model, exces -
sive brush motor current draw error.
40