IPC CT15R, Руководство оператора

Страница: 27 / 41

GB
Never wash the machine with water jets.
The fluids collected contain detergent, disinfectant, water and organic and inorganic material. They must be dispo -
sed off in accordance with current legislation.
In the case of malfunction and/or faulty operation, turn the machine off immediately (disconnecting it from the
mains power supply or removing the fuse from the battery bridge). Do not tamper with it otherwise. Contact a
service centre authorised by the Manufacturer.
All maintenance operations must be performed in an adequately lit place and only after disconnecting the machine
from the power supply (in cable models, unplug the machine from the mains power socket, in battery models,
remove the fuse from the battery bridge). In cable models, the operator must always be in a position to verify that
the plug remains unplugged from the mains power socket throughout maintenance operations.
All work on the electrical system and all maintenance and repair operations other than those explicitly
described in this manual must be performed by specialised personnel expert in the sector only.
If the power cable, plug or terminals require replacing, make sure the electrical connections and cable grip are
tightly fastened to guarantee the resistance of the cable if pulled. Only original accessories and spare parts sup -
plied by the Manufacturer may be used in order to guarantee safe problem-free operation of the machine. Never
use parts removed from other machines or from other kits.
This machine has been designed and constructed to provide ten years’ service from the fabrication date shown on
the rating plate. After this time, whether the machine has been used or not, it should be disposed of according to
current legislation in the country in which it is used:
the machine must be disconnected from the power supply, emptied of liquids and cleaned;
the product is classified as WEEE type special waste and is covered by the requisites of the new environmental
protection regulations (2002/96/EC WEEE). It must be disposed of separately from ordinary waste in compliance
with current legislation and standards.
Special waste. Do not dispose of with ordinary waste.
Alternatively the machine must be returned to the Manufacturer for a complete overhaul.
If you decide to stop using the machine, you are recommended to remove the batteries and dispose of them at
an authorised collection centre.
You should also make sure that all parts of the appliance which could represent a hazard, particularly to children,
are made safe.
HANDLING AND INSTALLATION
Lifting and transporting the packaged machine
IMPORTANT
During all lifting operations, make sure the packaged machine is firmly anchored to avoid it tipping up or
being accidentally dropped.
Always load/unload lorries in adequately lit areas.
The machine, packaged on a wooden pallet by the Manufacturer, must be loaded using suitable equipment (see
EC Directive 2006/42 and subsequent amendments and/or additions) onto the transporting vehicle. At destination,
it must be unloaded using similar means.
A fork lift truck must always be used to lift the packaged body of the machine. Handle with care to avoid knocking
or overturning the machine.
27