IPC B02200769 Скачать руководство пользователя страница 77

Страница: 77 / 186

1. Tap

Add to existing contact

from the Event detail view in Call History.

The Directory application opens with the Choose Contact selection mode, temporarily overlaying
Call History.

2. Select the contact record to be updated in the Directory application, and tap

Done

The Add to

<contact name>

modal dialog is displayed.

3. Optionally, select the label from the drop-down menu: None, Home, Work, Mobile.

4. Tap

Add

to save your changes.

5.8

Create a Favorites button from Call History

Create a new Favorites button from a selected event in Call History. You can choose an empty button or
replace a button.

Prerequisite: Perform the steps in

View Call History Event details

on page 75.

Note

You can create a Favorites button for intercom and dial tone media types only.

1. Tap

Add as Favorite

from the Event detail view in Call History.

The Favorites application opens with the Choose Buttons selection mode, temporarily overlaying Call
History.

2. To create a new button in Favorites:

a) Choose and tap an empty button.

b) Tap

Done

c) Update the information in the Add Button modal dialog as appropriate.

d) Tap

Save

The button is saved accordingly.

3. To replace a button in Favorites:

a) Choose and tap an assigned button.

b) Tap

Continue

when prompted to confirm the override operation.

c) Update the information in the Add Button modal dialog as appropriate.

d) Tap

Save

The button is replaced accordingly.

5.9

View or edit a Favorites button from Call History

If a selected event in Call History is already assigned to a Favorites button, you can view and edit the
button.

Prerequisite: Perform the steps in

View Call History Event details

on page 75.

1. Tap

View Favorite

from the Event detail view in Call History.

The Favorites application opens with the Edit Button modal dialog, temporarily overlaying Call
History.

2. Update the information about the Favorites button as appropriate.

3. Tap

Save

to save your changes.

5.8: Create a Favorites button from Call History

IPC Proprietary

Unigy 4.3

IQ/MAX TOUCH Turret User Guide

Содержание B02200769


























































































































































































Результаты поиска

Содержание B02200769

Отзывы:

Похожие инструкции для B02200769

Бренды по названию

Популярные бренды

IPC B02200769, Руководство пользователя

Результаты поиска

Содержание B02200769

Отзывы:

Похожие инструкции для B02200769

Бренды по названию

Популярные бренды