manualshive.com logo in svg

IPC B02200769, Руководство пользователя

Поделиться
Скачать
IPC B02200769 Скачать руководство пользователя страница 103

a) Tap the 

Left Ready

 or 

Right Ready

 status area in the footer of the Primary Module, then tap the

Redial

 button displayed in the Context Call Display (CCD).

Figure 52: Redial button in CCD

1

Redial button

An implicit hunt is performed to search for and seize an available line and the last number dialed
from the handset is redialed.

b) Seize any available line from your Favorites, then tap the 

Redial

 button displayed in the Context

Call Display (CCD).
The last number dialed from the handset is dialed.

c) Tap a 

Right Redial

 or 

Left Redial

 Function button in your Favorites.

An implicit hunt is performed to search for and seize an available line and the last number dialed
from the handset is redialed.

8.10

Active call options

8.10.1

Enable Record on Demand

The Record on Demand feature allows you to toggle Record on Demand on or off, if your user profile is
configured to do so.

Warning

Dynamic recording control is a specific requirement of worker union and regulations in Germany and Italy
only. Use of this feature outside of that region could violate other regulations.

The Record on Demand feature only applies to calls on the left or right handset (not speaker calls).
Record on Demand must be enabled by an administrator. This includes assigning a Right ROD and Left
ROD function button in Favorites.

Before placing a call, you can toggle recording on and off for a handset any number of times using a
Right ROD or Left ROD function button. During a call, you can toggle from the currently selected mode
(recording on or off) to the opposite mode; that selection remains in effect until the call ends and then
reverts to the default setting.

Tap the 

Record

 button in the Contextual Call Display to toggle the feature OFF or ON.

8.10.2

Mute a call

Mute a call on the handset or hands-free speaker.

8.10: Active call options

103

IPC Proprietary

Unigy 4.3

IQ/MAX TOUCH Turret User Guide

Содержание B02200769



























































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды