IP autoscript WinPlus-IP, Руководство по установке и эксплуатации

Страница: 86 / 265

Page | 85
Limit maximum number of blank lines imported
This option lets you control how many blank lines are imported and how many are removed.
Often a script will be prepared where the writer has entered several blank lines to separate
segments, paragraphs etc. The reader may not want to see these and so can determine the number
of lines displayed on the prompter.
To enable this function, check the box and then enter the number of blank lines you require to
remain in the field to the right:
E.g.: With the above settings, when a run order is imported which has 4 blank lines, 3 of those blank
lines will be removed.
To switch this function off uncheck the box.
Please Note: this option applies both to when run orders are imported and when text is copy/pasted
into the Story Editor window.
New line after “.”, “?” or “!”
This feature will force a new line (carriage return) when a “.”, “?” or “!” is detected. To enable this
feature, check the box and then enter the number of spaces that must be detected after the “.”, “?”
or “!” to apply the carriage return.
Please Note: The spaces are not removed; the carriage return is placed after the number in the
“Spaces After” field and any additional spaces are carrie d over to the newly created line
The following examples use the sample text below