IP autoscript WinPlus-IP, Руководство по установке и эксплуатации

Страница: 110 / 265

Page | 109
Always show: This will always display the Timer regardless of its state
Please Note: When the Timer Display option is set to Never Show no other settings will available.
Time To Show Alert
This feature changes the colour of the Timer output to alert the viewer that a time of zero has been
reached. At this point the Timer counter will change from displaying the Active Colours to displaying
the Alert Colours. The time slider allows the user to select how long this change of colour will be
displayed within a range of 0 seconds
– 60 seconds.
Once the Time To Show Alert has exired the colours will revert to those set for Active or Inactive
depending on the settings in other Timer options.
Please Note: Time To Show Alert is only visible when Stop and alert at zero is selected in Timer
burger/Timer Preferences.
Timer Format
Use the Format pull down to select the Timer display.
In the below examples the Timer is set to 1 Hour, 23 Minutes and 45 seconds
hh:mm:ss : (Hours:Minutes:Seconds)
mm:ss (Minutes:Seconds)
ss (Seconds)
until under 1:00 minute then:
Total Seconds