IP autoscript WinPlus-IP, Руководство по установке и эксплуатации

Страница: 108 / 265

Page | 107
Setting the Timer
To set a time enter the time in numbers in the Input field.
This is in the form of seconds, minutes, hours.
Press Enter or click SET to apply this time to the Timer.
For example, typing 50 then pressing Enter or clicking SET will display 50 seconds in the Timer:
Typing 12345 then pressing Enter or clicking SET will display 1 Hour, 23 Minutes and 45 Seconds in
the Timer:
To start the Timer, click the Start Timer button.
To pause the Timer, click the Pause Timer button.
To reset the Timer, click the Reset/Zero Timer button.
To set the Timer to count up in seconds click the Count Up button.
To set the Timer to count down in seconds click the Count Down button.
Please Note: when the Timer is paused, or at zero time, it will be greyed out.
To Add/Remove Time
To add additional time to the Timer once it has already been set type the additional time into the
Input field and click the + button
To remove time from the Timer once it has already been set type the time you would like to remove
into the Input field and click the - button