NJR-CTB User
’s Guide
50
10.4.4.1 Multiviewers (Creating new Multiview configuration)
Procedure for creating a new Multiview configuration:
1. Click the
“New” button.
2. Enter the desired name into the
“Name” field.
3. Select a desired resolution that is output from receivers.
4. Select a layout.
5. Left click the desired cell to open another window. Select the receiver you want to assign.
Right click the cell (transmitter) you want to cancel.
6. Left click the
“Save” button to save configurations.
Saved configurations are added to the Control window and can be switched.
Step1
Step4
Step2
Step5
Step6
Step3
[Figure 10.3] Window for creating multiview
10.4.4.2Multiviewers (Editing Multiview configuration)
Procedure for editing a Multiview configuration:
Multiview configuration can be selected from
“Available Videowalls”, and the selected videowall configuration
can be edited and deleted.
Left click the
“Save” button to save the setting.
