14
Locking Levers. Pull the lever and turn it to the position that the lever is parallel to the saddle to prevent it
interfering with the DEC unit during mount GOTO and tracking.
Figure 13. Dovetail saddle locking levers
If you have a scope using a Losmandy dovetail plate, please follow the following
steps to convert
dovetail saddle from Vixen-type to Losmandy-type
.
(1) Loosen the two socket screws (red circled), move the fixed block outward. Then tighten the
screws.
Figure 14. Convert dovetail saddle to accept a Losmandy-D plate (1)
(2) Remove the two blue circled screws and pull the dovetail saddle locking block from the saddle.
(3) Release the four screws (yellow circled in Figure 14) to separate the saddle from the mount. Flip
the dovetail saddle locking block and secure it onto the saddle from bottom of the dovetail saddle
(blue squares in Figure 15)
Locking Lever
