background image

 

 

 

Features 

 

Rear Panel 

 
1.

 

Media Panel:

  Controls  for  the  USB,  SD,  FM 

radio, and Bluetooth sources. The Media Panel 
Mode source symbol will illuminate when that 
source is playing. 

Note:

 A USB drive or SD card must contain 

playable files in order for it to appear properly in 
the media panel’s display. You can play

 

MP3s, 

WAVs, and WMA files.  

2.

 

USB Port:

 Connect your USB flash drive here to 

play music. 

3.

 

SD Card Slot:

 Insert your SD card here to play 

music. 

4.

 

Display:

 Displays the media panel modes for 

USB, SD, FM radio, and Bluetooth. 

Note:

 The display comes with a plastic protector 

on it. Remove this for optimal viewing. 

5.

 

Mic Inputs

  (

1

/

4

”/

6.35 mm

 & 

XLR

)

:

 Connect a 

dynamic microphone to the 1/4” (6.35 mm) or 
XLR inputs. Control the volume of the inputs 
using the 

Mic Input

 

Volume

 knob. 

6.

 

Mic Input Volume:

 Turn this knob to adjust the 

input volume of the 

Mic Input

.

 

7.

 

Aux Inputs 

(1/8”/3.5 mm and 1/4”/6.35 mm)

:

 

Connect a CD player, digital media player, or 
other audio source to the 1/8” (3.5 mm) and 1/4” 
(6.35 mm) stereo auxiliary inputs. Control the 
volume using the 

Aux Input

 

Volume

 knob.

 

8.

 

RCA Inputs:

 Connect a CD player, digital media player, mixer, or other media source to 

these inputs. Control the volume using the 

Aux Input

 

Volume

 knob. 

9.

 

Aux Input Volume:

 Turn this knob to adjust the input volume of the 

Aux Input

XLR Input

and 

RCA Inputs

.

 

10.

 

Mix Out

 (

1/4” / 6.35 mm

)

:

 Connect this output to another active (powered) speaker. The 

level of the output is controlled by the 

Mic Input

 

Volume

Aux Input

 

Volume

, and 

Master 

Volume

11.

 

Mic Echo: 

Use this knob to add or remove an echo effect to the

 Mic Inputs

.

 

12.

 

High EQ:

 Increases or decreases the high (treble) frequencies for 

Mic Input

Line Input

and 

Media Panel

 sources at a range between -12 dB to +12 dB. 

13.

 

Low EQ:

 Increases or decreases the low (bass) frequencies for 

Mic Input

Line Input

, and 

Media Panel

 sources at a range between -12 dB to +12 dB. 

14.

 

Master Volume:

 Turn this knob to adjust the overall output volume of the loudspeaker.

 

 

1

2

3

4

5

9

8

7

10

11

12

13

14

15

17

16

6

18

19

20

Содержание Pro Glo 10









Отзывы: