8
Operation
Light Mode
When Pathfinder
™
280˚ is first turned on, the lights will be in
Color Cycle
mode and start to
slowly fade from one color to the next. To pause on a certain color, press and hold the
Light
button for 1 second. To enter
Beat Sync
mode and have the lights react to the beat of the
music, press and release the
Light
button. Press the
Light
button again to turn off the lights.
Bass and Treble Control
To adjust the EQ:
1.
Press the
EQ
button. “HI” (high frequency) will appear on the display.
2.
Turn the
Control Knob
to the left to decrease the high frequency.
3.
Turn the
Control Knob
to the right to increase the high frequency.
4.
Press the
EQ
button to confirm and adjust the low frequency.
5.
“LO” (low frequency) will appear on the display.
6.
Turn the
Control Knob
to the left to decrease the low frequency.
7.
Turn the
Control Knob
to the right to increase the low frequency.
8.
Press the
EQ
button to confirm.
Pairing a Bluetooth Device
1.
Make sure the speaker is within range of your Bluetooth device (no more than 100 ft. /
30.5 m away).
2.
Press the
Bluetooth button
on the speaker.
3.
Navigate to your Bluetooth device’s setup screen. Then find and select
Pathfinder 280˚
.
Do not connect to
Pathfinder 280_BLE
; this is reserved exclusively for connecting to the
ION Sound XP™
app. If your Bluetooth device prompts for a pairing code, enter
0000
.
Note:
If you have previously connected to your Bluetooth device, Pathfinder™ 280˚ will
reconnect automatically.
Tip:
Double-press the
Bluetooth
button
to enable or disable the Bluetooth pairing voice
prompts.
To disconnect a paired Bluetooth device, press the
Bluetooth button.
Linking Two Speakers
Note:
Visit
for a list of compatible ION speakers to link to Pathfinder
TM
280˚.
1.
Power on Pathfinder
TM
280˚ and the other compatible ION speaker.
2.
Press and hold the
Link
button to enter Stereo Link mode. Once a link has been
established, the word
LINK
will appear in the display.
Note:
It may take up to 1 minute to make the connection.
3.
Then, repeat this process on the other compatible ION speaker.
4.
To disconnect,
double press the
Link
button on one of the two speakers.
