ION Acadia, Руководство пользователя

Страница: 5 / 18

5
Bluetooth Connecting with Acadia
TM
Connecting to one Acadia
TM
speaker:
1. Power on the Acadia
TM
by holding down the Power button for 2 seconds. Acadia
TM
will
automatically enter Bluetooth pairing mode.
2. Navigate to your device’s Bluetooth setup screen, find Acadia , and connect. When
connected, the Bluetooth LED will be lit solid blue and you will hear “Connected”.
Note: Do not connect to Acadia_BLE ; this is reserved exclusively for connecting to the
ION Sound XP
TM
app. If you experience trouble in connecting, select “Forget this Device”
on your Bluetooth device and try to connect again.
3. To disconnect, turn off Bluetooth from your device’s Bluetooth settings, or press and
hold the Bluetooth button.
Syncing multiple Acadia
TM
speakers:
1. Connect to one Acadia
TM
speaker using the steps above. This will be the "primary"
speaker.
2. Double-press the Bluetooth button on the primary speaker to enter Multi-Sync
TM
mode. The
Bluetooth LED will change from blue to solid white to indicate it is in Multi-Sync
TM
mode.
Note: Acadia
TM
speakers should be within 100’ (30 m) of each other to properly sync. The
closer the speakers are, the faster they will sync.
Note: To exit Multi-Sync
TM
mode, double-press the Bluetooth button again.
3. Power on any other speakers. Press and hold the Bluetooth button on the secondary
speakers to disconnect any currently connected Bluetooth sources.
4. Double-press the Bluetooth button to enter Multi-Sync TM Mode for the secondary speakers.
The Bluetooth LED will begin flashing green and the secondary speakers should
automatically sync to the primary speaker.
5. Once a successful sync is established, the Bluetooth LED on the secondary speaker will be
lit solid green, and you will hear “Synced” from the “secondary” speaker.
Note: The Bluetooth range will be determined by the distance that your Bluetooth device is to
the “primary” speaker. See Technical Specifications for Bluetooth and Multi-Sync
TM
ranges.
Tip: Acadia
TM
can sync audio with other Multi-Sync
TM
-compatible ION Audio speakers. To find
out more, visit ionaudio.com .
Using the Radio
Selecting a radio station:
1. Press the Radio button to select FM Radio mode.
2. Press either of the Tune/Track buttons to select a radio station. The voice prompts will
indicate the current frequency.
To “seek” (jump to the next available station), hold either button down for a few seconds
until it starts to seek a station.