Ion+
®
Connect
Digital Level Control Switch With Alarm
OPERATION MANUAL
Dated: 07/18/2017
Document Name: Ion+Connect_OM
Page 1 of 12
www.ionproducts.net
Introduction
The Ion+ Connect is a residential sump/sewage ejector
pump controller equipped with the revolutionary Ion
®
level sensor and integrated cellular texting module.
The device will run a manual pump up to 12 FLA,
can sense up to 72” of water, has customizable start/
stop/alarm levels, and provides alarm notifications via
SMS text for alarms like high water, pump fail, power
fail, and many more.
What’s in the Box
The Ion+ Connect comes with:
1. Ion+ Connect
Pump Controller equipped with 10’ 115 VAC
15A cord
2. Ion Sensor with pipe clamp
Connects to Ion+ Connect to provide level
signal
POWER PUMP
ALARM
CELL
PUMP
TEST
SILENCE/
RESET
LOCK/
UNLOCK
REMOTE
ALARM
CONTACT
REMOTE
ALARM
INPUT
DIGITAL
LEVEL
SENSOR
W W W . I O N P R O D U C T S . N E T
INPUT:
120VAC 60HZ 15A
OUTPUT:
120VAC 60HZ 12FLA 72LRA
PATENTS PENDING
PATENT NO. 8,591,198
Connect
Features
The following illustration describes the physical
features of your Ion+ Connect.
1. Power LED
Indicates the power status of unit
Refer to the LED section for details
2. Pump LED
Indicates the pump status
Refer to the LED section for details
3. Alarm LED
Indicates alarm status
Refer to the LED section for details
4. Cell LED
Indicates cellular status
Refer to the LED section for details
5. Pump Test
Hold down button for 5 seconds to manually
run pump
6. Silence / Reset
Momentarily push for Alarm Silence
Hold to reset unit
7. Lock / Unlock
Press for approximately 3 seconds to
unlock unit to accept SMS/text configuration
commands
1
2
1
2
3
4
5
6
7
10 8
9
