P 1, 2, 3 & 5000 Ex Ion Science Ltd
Page 8 of 52
Getting started
_____
Packing List
Please take a little time to check the contents in the P case.
Item Description
Qty.
1. P instrument
1
2. PID lamp (fitted)
1
3. Probe - 100mm (fitted)
1
4. PTFE filter - 50 micron (fitted)
1
5. Battery charger (if rechargeable type)
1
6. Battery clip
(if non-rechargeable)
1
7. Screw driver (if non-rechargeable)
1
8. Manual
1
9. IonPC software CD
1
10. IS Protective Cover
1
11. Cal Kit Sample containing:
·
PID lamp cleaning Kit (Includes alumina
powder and 2 applicators for 1 clean)
1
·
Carbon canister
1
·
PTFE filter – 50 micron
1
·
Cal adaptor*
1
·
Lamp removal tools (neoprene sleeves)
2
* Please note that the Cal adaptor is to be used in conjunction with a P Calibration Kit accessory
(part number A-845213). WARNING: when fitting the Cal adaptor onto the gas tube (part of the
Calibration kit) ensure that the small breather hole of the Cal adaptor is not covered as this will cause the
instruments internal pump to be damaged beyond repair. Your warranty will be invalidated if the pump is
damaged in this way.
Removing the P from its case
Carefully remove the P instrument from its case being careful not to damage the filter and probe
assembly. 'Luer' type connectors are used to connect the P, filter and probe together and require a
quarter-turn ONLY to connect / disconnect them. Do not over tighten.
To avoid drawing dust or particulate matter into the detector cell we suggest always fitting the filter with the
Ion Science logo facing away from the instrument, therefore dust only collects on the same one side of the
filter and is not inadvertently drawn into the instrument if the filter is attached the other way round.
