DB-525
Front Panel 5.25 inch Device Bay
Installation Guide
Step 1
Step 3
Check the contents of the Box.
Install DB-525 to the computer.
Front Connect DB-525
metal frame with P.C.B
DB-525
plastic cover 1
for HDD
DB-525
plastic cover 2
for MO/FDD/Zip
Installation guide
Screws
6pin-to-6pin FireWire cable
(for DB-525USB1FW/
525USB2FW/ 525FW ONLY.)
A-to -5pin type USB cable
(for DB-525USB1/ 525USB2/
525USB1FW/525USB2FW ONLY.)
A-to-A type USB cable
(for DB-525USB1/ 525USB2/
525USB1FW/525USB2FW ONLY.)
N
N
N
T
T
EC
R
2.Insert your DB-525 into the slot,
Do not force it in any further than
needed.
Step 2
Remove the cover case from the computer.
Please check that everything
connected to the computer has
been removed and that the
c o m p u t e r i t s e l f h a s b e e n
switched off from the main
power supply.
Please consult the computer manual
when remove the cover case from the
computer.
Caution:
Please be careful when
removing the cover case as all edges
are sharp.
3 . P l e a s e u s e t h e s c r e w s
provided to lock the DB-525
into place.
Step 4
Step 5-2
Step 5-1
Step 5
Connect the FireWire cable.
(For )
IEEE-1394 host adapter with 6pin connector.
Connect the USB 2.0 interface cable.
Connect the USB 2.0 or 1.1 interface cable.
Connect the USB interface cable.
(For USB
)
2.0 host adapter with A-type connector
(For built-in internal USB 2.0 or 1.1 connector on mainboard.)
For built-in internal USB 2.0 or 1.1 connector on mainboard:
refer to Step 5-1.
For USB
2.0 host adapter with A-type connector:
refer to Step 5-2.
To connect the USB cable from the main board, please
mainboard manual and page 2 of this manual for further
Caution:
The USB port may be damaged if inserting USB flat
cable on reverse. ( Warranty does not cover such damage)
check your
connection instruction.
Inter nal IEEE 1394 Por t
Inter nal USB Por t
Inter nal USB Por t
Caution:
For easy installation,
connect the USB & FireWire
cables toDB-525 before insert
it into the slot.
Locate the FireWire 6pin-plug cable in the package.
Locate A-to-A type USB cable in the package.
Locate A-to-5pin type USB cable in the package.
1.Remove the 5.25-inch panel.
Further details on how to
remove the panel can be found
in your computer.
