Inxpect SBV System Series Скачать руководство пользователя

Страница: 99 / 102

9. Appendix

Contents

This section includes the following topics:

9.1 System software

9.2 Disposal

100

9.3 Service and warranty

100

9.1 System software

9.1.1 Introduction

The aim of this appendix is to provide and clarify the information related to the system software. It includes the

information necessary for the integrator during the installation and integration in accordance with IEC 61508-3

Annex D.
Considering that SBV System Series is an embedded system provided with a firmware already deployed on board,

no software integration is required by the system installer or by the end user. The following paragraphs analyzes

all the information required in IEC 61508-3 Annex D.

9.1.2 Configuration

The system configuration can be performed by means of a PC-based configuration tool, called the Inxpect Safety

application.
The system configuration is described in "Installation and use procedures" on page 51.

9.1.3 Competence

Although no competence is required for software integration, a skilled person is required for system installation

and configuration, as described in "Installation and use procedures" on page 51.

9.1.4 Installation instructions

The firmware is already deployed on the hardware, the PC-based configuration tool includes a self-explanatory

setup installer.

9.1.5 Outstanding anomalies

At the moment of the issue of this document, no software/firmware anomalies or bugs are known.

9.1.6 Backward compatibility

Backward compatibility is guaranteed.

9.1.7 Change control

Any change proposal suggested by the integrator or by the end user should be forwarded to Inxpect and

evaluated by the Product Owner.

9.1.8 Implemented security measures

Firmware upgrade packages are managed by the Inxpect technical support team and they are signed to prevent

the use of unverified binary files.

Содержание SBV System Series







































































































Результаты поиска

Содержание SBV System Series

Отзывы:

Похожие инструкции для SBV System Series

Бренды по названию

Популярные бренды

Inxpect SBV System Series, Инструкция по эксплуатации

Результаты поиска

Содержание SBV System Series

Отзывы:

Похожие инструкции для SBV System Series

Бренды по названию

Популярные бренды