In this example, detection field 1 generates a detection signal for target
[A]
but target
[B]
could not be detected.
In the
Inxpect Safety
application, click on
Settings
>
Sensors
>
Detection field dependency
to set the
dependency mode of the detection fields.
4.2.6 Independent detection fields: a use case
It can be useful to set the detection fields as independent, for example, if there is a scheduled temporary motion
of an object in a detection field. An example can be a robotic arm moving from right to left within the detection
field 1 only during a specific phase of the operative cycle.
In this case, it is possible to ignore the detection signal in the detection field 1, thus avoiding unnecessary
downtime.
WARNING! Evaluate the safety of the monitored area during risk assessment before deciding to
ignore the detection signal of the detection field 1.
WARNING! The blind area generated by the moving robotic arm can prevent the sensor from
detecting targets in the following other detection fields for an interval of time. This time must be
considered when defining the detection distance for detection field 2.
4. Functioning principles
SBV System Series | Instruction manual v1.2 DEC 2021| SAF-UM-SBVBus-en-v1.2 | © 2021 Inxpect SpA
31
Содержание SBV System Series
Страница 101: ......
