Inxpect MSK-101, Руководство по продвинутой настройке

Страница: 19 / 34

7. Pass the cable into the sensor housing.
8. Assemble the sensor housing to the adapter.
Connect the sensor to the alarm
control unit
1. Remove the sheath and the hose by at least 5 cm
(2 in).
2. Connect the power supply and relay outputs. It is
recommended to connect relay 3 (tampering) and
4 (fault) to a 24 h line from the alarm control unit.
Direct the sensor and connect the
dongle
1. Insert the sensor into the adjustable support,
leaving the connector in sight.
2. Turn the sensor to lock it into the adjustable
support.
Installation and use
MSK-101 | Advanced configuration manual v1.5 MAY 2018 | msk-101_advanced-config_en_wo v1.5 | © 2017-2018 Inxpect SpA
19