manualshive.com logo in svg

InWin IW-RJ448-05, Руководство пользователя, Страница: 52 / 57

Поделиться
Скачать
InWin IW-RJ448-05 Скачать руководство пользователя страница 52

 

 

49 

 
 

4.3.11

 

Advanced Configuration 

There are some other advanced configurations that the users might want to 
configure to the non-factory-default settings. 

 

 

Warning: 

 

Changing factory default setting is not encouraged. Please be sure you have 
consult our technical staffs before making these changes. 

 

Be cautious to the risks of the changes you have made.

 

 

 

4.3.11.1

 

Cooling Policy 

■

 

The factory default system cooling mode is set to regular cooling mode 

which might cover most system thermal requirement cases. However, the 
JOBD systems designed to allow users configuring to other modes for 
some applications.

   

 

■

 

Uers can then configure the system cooling mode in console CLI.   

 
For RJ-472-05 and RJ-448-05:   

Command “ucfg cool” under “mgmt.s

\

console 0” layer to show the 

current cooling mode.   

 

 

Command “ucfg” under “mgmt.s

\

console 0” to show cooling mode 

allowed to set.   

 

 

Command “ucfg cool <CoolMode> under “mgmt.s

\

console 0” layer to 

change cooling mode. eg. “ucfg cool ac” will turn cooling mode into 

aggressive mode.   
Be sure to configure the same on both domains and reset system to take 
effect the settings.   
 

For RJ-212, RJ-316, RJ-224 and RJ-424:   

Command “? c.syscfg” under “mgmt.s

\

primary” or “mgmt.s

\

secondary” 

layer to show the cooling mode allowed to set.   

Содержание IW-RJ448-05


























































Отзывы:

Нет отзывов