INVT BD100KTR-P, Руководство пользователя

Страница: 8 / 54

7
2.6 On-line test specification
2.6.1 On-line Test
There is a high voltage in the equipment. Accidental contact may lead to fatal shock hazard.
Therefore, in live measurement, it should:
：

Ensure adequate levels of protection (such as wearing insulating gloves, insulating
shoes, etc.).

At least two persons must be ensured to be on site to ensure personal safety.
2.6.2 Use of Measuring Equipment
In order to ensure that the electrical parameters meet the requirements, it is necessary to
use relevant electrical measuring equipment when conducting electrical connection and
trial operation of energy storage inverter.

Selection of measuring range, usable conditions and other high-quality measuring
equipment that meet the requirements of the site.

Ensure that the connection and use of measuring equipment are correct and
standardized so as to avoid the danger of arcing.
2.7 Touch Screen Parameter Setting
The parameters of touch screen are closely related to the operation of energy storage
inverter. These parameters can only be modified after reliable analysis and evaluation of
the operation status of the system and energy storage inverter.

Using inappropriate parameter settings may affect the normal function and
capabilities of energy the storage inverter.

Only authorized professionals can set the parameters of energy storage inverters.
2.8 Maintenance Or Overhaul Specifications
The following points should be noted when performing maintenance or maintenance
operations on equipment:
：

Securely mark and ensure that the energy storage inverter will not be accidentally re-
energized.

Use a multimeter to ensure that the internal discharge of the energy storage inverter is
completed.

Ensure that the equipment is well grounded.

Any live parts must be covered with insulating materials.

After the energy storage inverter is switched off and the AC/DC power supply is
disconnected, the front door can be opened after at least 15 minutes to maintain or
repair the energy storage inverter.

During the whole process of maintenance and overhaul, it is necessary to ensure
adequate escape route or space.
DANGER
WARNING
WARNING