LED PANEL450 & LED PANEL500
USER MANUAL
CAUTION!
Keep this device away from rain and moisture
!
Unplug mains lead before opening the housing
!
For your own safety, please read this user manual carefully before you initially start-up.
Every person involved with the installation, operation and maintenance of this device has to
z
be
qualified
z
follow the instructions of this manual
z
consider this manual to be part of the total product
z
keep this manual for the entire service life of the product
z
pass this manual on to every further owner or user of the product
z
download the latest version of the user manual from the Internet
INTRODUCTION
Thank you for having chosen LED PANEL450 /LED PANEL500. If you follow the instructions given in this manual, we are sure that you will
enjoy this device for a long period of time. The device features a built-in microphone.
Unpack your LED Panel Before you initially start-up, please make sure that there is no damage caused by transportation. Should there be any,
consult your dealer and do not use the device.
Features:
*648 ultra bright LEDs, RGB color mixing
*8 blocks individually controllable block
*Either sound-controlled or via DMX
*2 DMX modes which convertible via DMX
*DMX mode 1 with 12 channels allows to set color for each block easily
*DMX mode 2 with 12 channel allows to set color various in 16.8 millions colors for each block
*Stand-alone operation with master/slave
*Standard LEDs Beam angle 25°
*8 built-in programs can be triggered by DMX
*Stunning strobe effects in any color
*1-50 flashes per second
*LCD d jog wheel for menu control
*Powered by quality switching power supply
*Power consumption 55W
*Panel450 / 405 x 212 x 80 mm, 4.0 KG; LED Panel500 / 820 x 117 x 73 mm; 4.5 KG
SAFETY INSTRUCTIONS
CAUTION!
Be careful with your operations. With a dangerous voltage you can suffer a dangerous electric shock
when touching the wires!
This device has left our premises in absolutely perfect condition. In order to maintain this condition and to ensure a safe operation, it is
absolutely necessary for the user to follow the safety instructions and warning notes written in this user manual.
Important:
Damages caused by the disregard of this user manual are not subject to warranty. The dealer will not accept liability for any
resulting defects or problems.
If the device has been exposed to drastic temperature fluctuation (e.g. after transportation), do not switch it on immediately. The arising
condensation water might damage your device. Leave the device switched off until it has reached room temperature.
Please make sure that there are no obvious transport damages. Should you notice any damages on the A/C connection cable or on the casing,
do not take the device into operation and immediately consult your local dealer.
This device falls under protection-class I. The power plug must only be plugged into a protection class I outlet. The voltage and frequency must
exactly be the same as stated on the device. Wrong voltages or power outlets can lead to the destruction of the device and to mortal electrical
shock.
Always plug in the power plug last. The power plug must always be inserted without force. Make sure that the plug is tightly connected with the
outlet.
Never let the power-cord come into contact with other cables! Handle the power-cord and all connections with the mains with particular caution!
Never touch them with wet hands, as this could lead to mortal electrical shock.
Never modify, bend, strain mechanically, put pressure on, pull or heat up the power cord. Never operate next to sources of heat or cold.
Disregard can lead to power cord damages, fire or mortal electrical shock.
The cable insert or the female part in the device must never be strained. There must always be sufficient cable to the device. Otherwise, the
cable may be damaged which may lead to mortal damage.
Make sure that the power-cord is never crimped or damaged by sharp edges. Check the device and the power-cord from time to time.
If extension cords are used, make sure that the core diameter is sufficient for the required power consumption of the device. All warnings
concerning the power cords are also valid for possible extension cords.
Always disconnect from the mains, when the device is not in use or before cleaning it. Only handle the power-cord by the plug. Never pull out
the plug by tugging the power-cord. Otherwise, the cable or plug can be damaged leading to mortal electrical shock. If the power plug or the
power switch is not accessible, the device must be disconnected via the mains.
If the power plug or the device is dusty, the device must be taken out of operation, disconnected and then be cleaned with a dry cloth. Dust can
reduce the insulation which may lead to mortal electrical shock. More severe dirt in and at the device should only be removed by a specialist.
There must never enter any liquid into power outlets, extension cords or any holes in the housing of the device. If you suppose that also a
