18
Part 3: Functions:
3.1 LCD display with 4-button operation:
Connect the "LED MH127B" to the mains. The device carries out the usual reset process. Wait for it to finish. The
LCD display with 4-button operation is, so to speak, the heart of the "LED MH127B". All functions and modes can be
set here. The individual functions and modes are listed in a table below.
Menu structure:
SET ( Setting )
Run Mode
DMX
DMX mode is active
Sound
With this function, the internal programs
can be called up and played in a music-
controlled manner
Random
Auto program at random
F-Sleep8
Movement program 1
F-Stand8
Exercise program 2
Forward0
Exercise program 3
DrawUp8
Exercise program 3
AUTO4
Auto program4
AUTO3
Auto program3
AUTO2
Auto program 2
AUTO1
Auto program 1
DMX-Adress
001-512
With the UP and DOWN buttons you can
now set the desired DMX start address and
confirm with ENTER
Channel Mode
19CH
With the UP and DOWN buttons you can
now select the desired DMX mode and
confirm with ENTER
15CH
Sound Sensitivity
0-100
With this function the microphone sensitivity
can be adjusted.
Invert PAN
ON/OFF
This function can be used to reverse the
PAN movement
Invert TILT
ON/OFF
This function can be used to reverse the
TILT movement
Swap PAN-TILT
ON/OFF
This function can be used to interchange
PAN and TILT
Encoder PAN-TILT
ON/OFF
Automatic correction of the PAN / TILT
position
Swap Dimmer-Delay
ON/OFF
This function can be used to set the dimmer
function. ON = soft dimming. OFF = hard
dimming.
No DMX Signal
KEEP/CLEAR
With this function the DMX value can be
kept (keep) or set to zero (clear) if no DMX
signal is received.
Display Power Save
ON/OFF
In this setting, the display switches off 30
seconds after the last entry and switches on
again as soon as you make a setting.
Load Default
OK/Cancel
Reset to factory settings
PAN
0-255
Set the PAN position manually
PAN Fine
0-255
Manually set the PAN position with 16-bit
resolution
TILT
0-255
Set the TILT position manually
TILT Fine
0-255
Manually set the TILT position with 16-bit
resolution
