Invertek Drives OPTIDRIVE ODP-2-22010-1HF42-SN, Руководство пользователя, Страница: 65 / 72

Version 2.04
| Optidrive ODP-2 Solar Pump User Guide |
65 www.invertekdrives.com
11. Technical Data
11.1. Environmental
Ambient
Temperature
Storage and Transportation All Units -40 … 60°C / -40 … 140°F
Operating IP20 Units -10 … 50°C / 14 … 122°F
IP55 Units - 10 … 40°C / 14 … 104°F
UL Approved
40 … 50°C / 104 … 122°F With derating (refer to section 11.3.1. Derating for
Ambient Temperature on page 67 )
IP66 Units - 10 … 40°C / 14 … 104°F UL Approved
40 … 50°C / 104 … 122°F With derating (refer to section 11.3.1. Derating for
Ambient Temperature on page 67 )
Altitude Operating All Units =<1000m With UL approval
=<4000m With derating (refer to section 11.3.2. Derating for
Altitude on page 67 )
Relative Humidity Operating All Units < 95% non-condensing, frost and moisture free
11.2. Output Power and Current ratings
The following tables provide the output current rating information for the various Optidrive P2 models. Invertek Drives always
recommend that selection of the correct Optidrive is based upon the motor full load current at the incoming supply voltage. The PV DC
Spply Fuse rating and type can be calculated based on the drive rated output current multiplied by the rated output voltage divided by
the array Vmpp. In the table below, the figure used for the Vmpp is 325Vdc for the 240Vac product and 565Vdc for the 440V product.
11.2.1. 200 – 240 Volt (+/- 10%),1 Phase Input, 3 Phase Output
Frame
Size
Power Rating
DC Supply
Semiconductor
Fuse
AC Supply Fuse
or MCB (Type B)
Maximum Cable Size
Rated
Output
Current
Maximum Motor
Cable Length
kW HP UR gG mm AWG/kcmil A m ft
2 0.75 1 6 10 15 8 8 4.3 100 330
2 1.5 2 8 25 20 8 8 7 100 330
2 2.2 3 12 25 25 8 8 10.5 100 330
11.2.2. 200 – 240 Volt (+/- 10%), 3 Phase Input, 3 Phase Output
Frame
Size
Power Rating
DC Supply
Semiconductor
Fuse
AC Supply Fuse
or MCB (Type B)
Maximum Cable Size
Rated
Output
Current
Maximum Motor
Cable Length
kW HP UR gG mm AWG/kcmil A m ft
2 0.75 1 6 10 10 8 8 4.3 100 330
2 1.5 2 8 10 15 8 8 7 100 330
2 2.2 3 12 16 17.5 8 8 10.5 100 330
3 4 5 20 25 30 8 8 18 100 330
3 5.5 7.5 30 40 40 8 8 24 100 330
4 7.5 10 35 50 50 16 5 30 100 330
4 11 15 50 63 70 16 5 46 100 330
5 15 20 70 80 90 35 2 61 100 330
5 18.5 25 80 100 110 35 2 72 100 330
6 22 30 100 125 150 150 300MCM 90 100 330
6 30 40 125 160 175 150 300MCM 110 100 330
6 37 50 175 200 225 150 300MCM 150 100 330
6 45 50 200 250 250 150 300MCM 180 100 330
7 55 50 225 250 300 150 300MCM 202 100 330
7 75 50 300 315 350 150 300MCM 248 100 330
11
Technical Data