INVENTOR U6MRS32-18, Руководство по обслуживанию

Страница: 62 / 280

 Wiring Diagrams 
10.2 Micro-Switch Introduce:
1 2
ON
1 2
ON
1 2
ON
1 2
ON
SW1
TEL0 24
℃
15
℃
8
℃
EEPROM
DEFAULT
FACTORY
SETTING
FOR ANTI-COLD WIND
A. Micro-switch SW1 is for selection of indoor fan stop temperature (TEL0) when it is in anti-cold wind action in heating
mode.
Range: 24°C, 15°C, 8°C, according to EEROM setting (reserved for special customizing).
FOR SETTING FAN MOTOR CONTROL
WHEN THERE IS NO DEMAND
1
ON
1
ON
SW2
FAN OFF FAN ON M O D E
F A C T O R Y S E T T I N G
B. Micro-switch SW2 is for selection of indoor FAN ACTION if room temperature reaches the set point and the
compressor stops.
Range: OFF (in 127s), Keep running.
1
ON
1
ON
FACTORY SETTING
FOR SETTING AUTO-RESTART FOR SETTING AUTO-RESTART
SW3
MODE
AUTO-RESTART NOT AUTO-RESTART
C. Micro-switch SW3 is for selection of auto-restart function.
Range: Active, inactive