INVENTOR U6MRS32-18, Руководство по обслуживанию

Страница: 153 / 280

 Product Features 14 
4. SLEEP: Select this function during the sleeping time. It
keeps the most comfortable temperature and save energy.
This function is available on COOL, HEAT or AUTO mode
only.
NOTE: While the unit is running in sleep mode, it would
be cancelled if MODE, FAN SPEED or ON/OFF button is
pressed.
5. TURBO Button: Active/Disable Turbo function. Turbo
function enables the unit to reach the preset temperature
at cooling or heating operation in the shortest time(if the
indoor unit does not support this function, there is no
corresponding operation happened when pressing this
button.)
6. UP Button( ): Increase the set temperature. Keeping
pressing will increase the temp with 1 ℃ per 0.5s.
DOWN Button( ): Decrease the set temperature.
Keeping pressing will decrease the temp with 1
℃
per
0.5s.
NOTE: Temperature control is not available in Fan mode.
7. SHORTCUT Button
Used to restore the current settings or resume previous
settings.
On the first time connecting to the power, if push the
SHORTCUT button, the unit will operate on AUTO mode,
26
℃
, and fan speed is Auto.
Push this button when remote controller is on, the system
will automatically revert back to the previous settings
including operating mode, setting temperature, fan speed
level and sleep feature (if activated).
If pushing more than 2 seconds, the system will
automatically restore the current operation settings
including operating mode, setting temperature, fan speed
level and sleep feature (if activated ).
8. TIME ON: For time ON setting. Once pressing this
button, the time will increase by 0.5 hour. When the
time exceeds 10 hours, pressing the button will increase
the time by 1 hour. Adjust the figure to 0.00 will cancel
time ON setting.
9. TIME OFF: For time OFF setting. Once pressing this
button, the time will increase by 0.5 hour. When the set
time exceeds 10 hours, pressing the button will increase
the time by 1 hour. Adjust the figure to 0.00 will cancel
time ON setting.
10. SWING Button
Used to stop or start vertical louver movement and set
the desired left/right air flow direction.The vertical louver
changes 6 degree in angle
for each press.
Used to stop or start horizontal louver auto swing feature.
11. SWING Button
Used to stop or start horizontal louver movement or set
the desired up/down air flow direction. The louver changes
6 degree in angle for each press. If keep pushing more
than 2 seconds, the louver will swing up and down
automatically.
12. LED
Disable/Active indoor screen Display. When pushing the
button, the indoor screen display is cleared, press it again
to light the display.