INVENTOR U6MRS32-18, Руководство по обслуживанию

Страница: 151 / 280

 Product Features 12 
5. Remote Controller Functions
5.1 Infrared Wireless Remote Controller
5.1.1 RG51C/E(Standard for cassette)
Remote Controller Specifications
Model RG51C/E
Rated Voltage
3.0V (Dry batteries R03/
LR03×2)
Reaching Distance
8m((when using 3.0
voltage, it Gets 11m))
Environment Temperature
Range
-5 ℃ ~60 ℃( 23 ℉ ~140 ℉)
Buttons and Functions
1. TEMP UP : Push this button to increase the indoor
temperature setting in 1
℃
increments to 30
℃
2. TEMP DOWN : Push this button to decrease the
indoor temperature setting in 1
℃ increments to 17 ℃.
3. MODE: Once pressing, running mode will be selected in
the following sequence:
NOTE: No heating mode for cool only type unit.
4. VERT SWING: Used to stop or start horizontal
louver movement. The louver will swing up and down
automatically if push this button.
AIR DIRECTION: Used to set the desired up/down air flow
direction. The louver changes 6 degree in angle for each
press.
5. HORIZ SWING: Used to stop or start vertical louver
movement.
6. FAN SPEED+ MODE: Press the Mode and Fan speed
button simultaneously for 2 seconds. The remote
controls into faceplate setting state and the LCD shows
F2. Press the TEMPUP(
) to control the faceplate up and
press the TEMP DOWN( ) to control the faceplate down.
Press any button to exit the faceplate setting state, then
the LCD back to the normal display.
7. ON/OFF: For turning on or turning off the air
conditioner.
8. FAN SPEED: Fan speed will be selected in following
sequence once pressing this button:
9. TIME ON: For time ON setting. Press this button to
activate the Auto-on time setting. Each press will increase
the time setting in 30 minutes increments, up to 10 hours,
then at 1 hour increments up to 24 hours. To cancel the
Auto-on time setting, just press the button until the time
setting is 0.0.
10. ECO: Select this function during the sleeping time. It
can maintain the most comfortable temperature and save
energy. This function is available on COOL, HEAT or AUTO
mode only .
NOTE: While the unit is running under Energy-saving
mode, it would be cancelled if press MODE, FAN SPEED or
ON/OFF button.
11. TIME OFF: For time OFF setting. Press this button to
activate the Auto-off time setting. Each press will increase