INVENTOR U6MRS32-18, Руководство по обслуживанию

Страница: 149 / 280

 Product Features 10 
• Switch off
• Changes in:
• mode
• fan speed
• sleep mode
• Follow me
3.9 Timer Function
• The timing range is 24 hours.
• Timer On. The machine turns on automatically at the
preset time.
• Timer Off. The machine turns off automatically at the
preset time.
• Timer On/Off. The machine turns on automatically at
the preset On Time, and then turns off automatically
at the preset Off Time.
• Timer Off/On. The machine turns on automatically at
the preset Off Time and then turns off automatically at
the preset On Time.
• The timer does not change the unit operation mode.
If the unit is off now, it does not start up immediately
after the “timer off” function is set. When the setting
time is reached, the timer LED switches off and the
unit running mode remains unchanged.
• The timer uses relative time, not clock time
3.10 ECO function
• The ECO function is available in cooling, heating, or
auto mode.
• The operational process for sleep mode is as follows:
• When cooling, the temperature rises 1°C (to not
higher than 30°C) every hour. After 2 hours, the
temperature stops rising and the indoor fan is fixed
at low speed.
• When heating, the temperature decreases 1°C(to
not lower than 17°C) every hour. After 2 hours, the
temperature stops decreasing and the indoor fan is
fixed at low speed. Anti-cold wind function takes
priority.
• The operating time for sleep mode is 8 hours, after
which, the unit exits this mode and does not switches
off.
3.11 Auto-Restart function
• The indoor unit has an auto-restart module that
allows the unit to restart automatically. The module
automatically stores the current settings and in the
case of a sudden power failure, will restore those
setting automatically within 3 minutes after power
returns.
3.12 Drain Pump Control(Standard for
cassette type)
• Use the water-level switch to control drain pump.
• The system checks the water level every 5 seconds.
• When the A/C operates in cooling. the pump begins
running immediately and continuously until cooling
stops.
• When the A/C operates in forced cooling mode and
defrosting mode, the pump is running continuously.
• If the water level increases up to the control point, the
LED displays an alarm code and the drain pump opens
and continually monitors the water level. If the water
level falls and LED alarm code is no longer displayed
(drain pump close delay is 1 minute), the unit goes
back into its last mode. Otherwise, the entire system
(including the pump) stops and the LED displays an
alarm again after 3 minutes.