INVENTIA MT-301 страница 27 Скачать руководство пользователя

Страница: 27 / 59

7.2.3.6. Number of GPRS transmission retries

Function

defines number of retries of GPRS transmission in case of not
receiving confirmation in time defined by Transmission timeout

parameter

Data type

- number

Range

- 0…255

Setting this parameter to

results in sending data without

waiting for confirmation of error-free reception.

Default value

- 3

Comments

In normal conditions, it is not recommended to set this value to

higher than 3. This effectively secures against loss of
transmitted data without hampering processing following rules.

Note that consecutive data will be sent after successful
conclusion of current transmission.

7.2.3.7. Transmission timeout

Function

defines waiting time (in seconds) for confirmation of reception

of sent data frame.

Data type

- number

Range

- 0…655

[s]

Default value

- 12

[s]

Comments

This value in connection with declared Number of GPRS
transmission retries defines max. time of one data packet

transmission, described by formula:

MaxT

= (

number

GPRS transmission retries

+1)*transmission

Timeout

For default values: MaxT = (3 + 1) * 12 = 48s. Please notice
that calculated value does not define the time of delivery but

the time to elapse before the module considers that
transmission to appointed IP address is not possible (the data

will be lost due to unavailability of recipient) and moves to
sending next data frame awaiting transmission.

7.2.3.8. Idle time

Function

Defines the interval (in seconds) for sending data frame (ping)

controlling the ability to communicate with the network in case
of transmission inactivity

Data type

- number

Range

- 0…86400

[s]

(24h)

Default value

- 240

[s]

Comments

in case of inactivity longer than the value defined in this
parameter the module sends a control frame in order to check

whether transmission is still possible. During network check,
control data frame is sent to module's own IP address,

respecting timeout and number of retries parameters. The
length of the frame is 45B+length of the module's name. The

frame is sent to module's own IP address or to the address
defined in parameter GPRS testing IP address, if different than

0.0.0.0.
No reply to sent frame after exercising defined timeout and

Содержание MT-301




























































Результаты поиска

Содержание MT-301

Отзывы:

Похожие инструкции для MT-301

Бренды по названию

Популярные бренды

INVENTIA MT-301, Руководство пользователя

Результаты поиска

Содержание MT-301

Отзывы:

Похожие инструкции для MT-301

Бренды по названию

Популярные бренды