manualshive.com logo in svg

inVENTer sMove S4 Long, Инструкция по установке и эксплуатации

Поделиться
Скачать
inVENTer sMove S4 Long Скачать руководство пользователя страница 10

10

SYSTEM OVERVIEW 

sMove controller 

•

 Installation and operating manual

2.3 

Design and features

Control panel

The control panel is located on the front of the control unit and also serves as a display surface. 

It is composed of capacitive buttons and various indicator lights. It is operated by touching the 

various buttons (marked in grey in figure 2).

Figure 2: Operating and display elements on the control 
panel

Slide control:

Briefly pressing the fan symbol allows you to select one of the four specific output levels. 

Touching the slide control for approx. one second lets you continuously adjust the output level by 

moving it. The position of the illuminated display on the left side of the slide control indicates the 

currently set output level.

Mode button: 

Pressing repeqtedly lets you switch between the heat recovery and continuous ventilation 

modes. The indicator lights to the left of the Mode button displays the currently set mode.

Pause/Off button

:

A brief press of the controller allows you to switch to the pause function for a chosen time.  

In the standard version, pressing the button for 5 seconds allows you to completely switch off all 

ventilation units connected to the controller. Pressing it again switches the connected ventilation 

units back on. In

 Flat version the ventilation unit cannot be shut off completely.

1  Marker for output levels 1 – 4

2  Continuous ventilation mode 

   (blue) indicator light / 

   filter change indicator (blue flashing)

3  Operating mode button

4  Heat recovery mode 

   (orange) indicator light / 

   filter change indicator (orange flashing)

5 

Pause/Off indicator light

6 

Pause/Off button

7  Output level indicator lights

8  Slide control

1

2
3
4

5

6

7

8

Содержание sMove S4 Long

















































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды