manualshive.com logo in svg

inVENTer Connect inner cover, Руководство по эксплуатации, Страница: 36 / 104

Поделиться
Скачать
inVENTer Connect inner cover Скачать руководство пользователя страница 36

36

OPERATION AND SET-UP ON THE CONTROLLER

inVENTer Connect controller platform | Operating instructions

3.6  Activating the boost / pause function globally

The boost / pause function can be activated for the entire system or specifically for each ventila

-

tion zone. This chapter describes how to activate the boost/pause function for the entire system.

The procedure for activating the boost / pause function only for a specific ventilation zone can be 

found in 

 3.7: Activating the boost / pause function by zone.

Activating the pause function globally

Requirements:

•  The "System information" display screen of any 

ventilation zone, here ventilation zone 1  

(standard zone), is called up.

 

►

Press the Boost/Pause key.

 

The auto symbol flashes on the display screen.

 

►

Press the Boost/Pause key.

 

The pause symbol flashes on the display screen.

 

At the same time, the pause function time setting 

(timer) appears on the display screen.

 

►

Press the up and down arrow keys to set 

the desired time for pause mode.

When setting the pause time, you can choose 

between 1, 2, 4 and 8 hours.

PUSH

Содержание Connect inner cover









































































































Отзывы:

Нет отзывов