inVENTer 1505-0036, Настройка

Страница: 2 / 24

User and safety instructions
Before commissioning the system, read this manual carefully and follow
the instructions given to avoid personal injury and damage to property.
Use all components of the system only according to their intended use.
Changes or modifications are not permitted.
Any kind of use other than the intended use will exclude all liability claims.
All system components comply with the applicable technical safety
requirements and standards for electrical equipment. It may only be set up and
operated in conjunction with this documentation.
Installation, electrical connection and commissioning of the controller may only
be performed by qualified personnel. Qualified personnel within the meaning
of the safety notices in this documentation are persons who are authorised
to install, put into operation and identify equipment, systems and circuits in
accordance with established safety procedures.
Symbols used in this documentaion
NOTICE:
Indicates a direct or possible risk of property damage due to an adverse
event/state.
TIP:
A TIP symbol indicates practical and useful tips for handling
the inVENTer Connect system.
 Action required: This prompts the user to perform a specifc action.

Check the results: requires the user to check the results of the action
performed.
Before the action sequences, tools and aids for the activities to be
carried out are listed.
Book: refers to another section in this documentation.
1
