inVENTer 1505-0036, Настройка

Страница: 17 / 24

Navigation bar : cross-zone control and
information.
The controller, as the central control unit, is
always displayed as the first device and is
automatically assigned to ventilation zone 1.
This cannot be changed (in grey).
All other components are displayed in
the order in which they were paired and
designated (corresponds to numbering
whilst pairing). By default, all devices are
assigned to ventilation zone 1. They can
be assigned to one of the four ventilation
zones defined in the system (min. 2
ventilation units per zone and an even
number of units!).
 Device symbol : Press the icon of a
paired device and rename it if necessary.
 Press the „ventilation zone“ button
and change the ventilation zone
assignment.
Text in gey: ventilation zone
cannot be changed.
The menu item „Device overview“ is described in the inVENTer Connect
controller platform‘s detailed operating instructions (5022-0006).
 Press the arrow in the upper left corner of
a display window to return to the menu
window. The arrow always takes you
back one application level.
26°C
26%
Device 5
25,4°C
22,1%
20,4°C
44,1%
CO2
Device 0
Device 1
Device 2
Device 3
Device 6
Ventilation zone 1
Ventilation zone 1
Ventilation zone 1
Ventilation zone 1
Ventilation zone 1
Ventilation zone 1
Lorem ipsum
Device 4
Ventilation zone 1
Easy Connect e16
Controller
Device/Sensor
26°C
26%
Device 5
25,4°C
22,1%
20,4°C
44,1%
CO2
Device 0
Device 1
Device 2
Device 3
Device 6
Ventilation zone 1
Ventilation zone 1
Ventilation zone 1
Ventilation zone 1
Ventilation zone 1
Ventilation zone 1
Lorem ipsum
Device 4
Ventilation zone 1
Easy Connect e16
Controller
Device/Sensor